How to make your own hardwood floors cleaner
Hardwood floors can be hard to clean.
You can’t just wash them off with the tap water you use.
They’re often damp and dirty.
But you can do something about it.
Here are some of the steps you can take to make the floors that much cleaner.
Use a hardwood scrubber.
This is the most efficient method.
If you want to get rid of mold, you can use the same kind of hardwood you scrub with every week.
Just use a regular, nonabrasive scrubber and make sure it’s nonabrasion-resistant.
A commercial hardwood cleaning scrubber will also work.
If there’s mold in your carpet, try a high-speed carpet cleaner like Tenebrous or Cane Creek.
A high-efficiency scrubber won’t scrub the surface that’s still wet.
And it will make the carpet smell good and make it look nice and fresh.
Spray a soft damp cloth on the floor.
This step can also be done by spraying a soft towel with a soft fabric towel and wiping it off with a cloth towel.
You’ll want to be careful not to scrub the carpet lightly.
That’s why a soft cloth towel will work best.
Put the carpet on a towel-dryer.
If your carpet is very dirty, the carpet dryer will do the trick.
If it’s not clean, a hard-boiled egg is a good choice for this task.
You may have to add a few drops of detergent to make sure you don’t get carpet dust and debris on the towel.
Clean the floor by hand.
The hardest part of cleaning a hard floor is removing it.
But with a few simple steps, you’ll be able to make that job much easier.
The best way to get it clean is to use a vacuum.
It will vacuum the carpet, and then it will remove any mold that may have been in the carpet.
The carpet will dry naturally and then the next step is to put it back in its place.
Here’s how to do that: 1.
Clean out the floor with a vacuum cleaner.
Make sure to vacuum the entire carpet.
Don’t be shy.
You want to eliminate as much of the mold as possible before you start to dry the floor in a vacuum machine.
Put a damp cloth over the carpet and vacuum it.
If the carpet has mold on it, you will want to put a damp towel on top of it. 3 .
If the floor is still wet, you may need to spray a soft, non-abrasable cloth towel with detergent.
Dry the floor and put it in a dryer for 15 minutes.
If all of the above works, you’re ready to start on your next hard floor.
And there you have it!
That’s all there is to cleaning a soft floor.